Skip to main content

Cleaning out tools and preparing floors

Friday

Siggy installed pretty LEDs in the fixtures.


Saturday

Dump run! Siggy and Jon cleared out the storage container to make room for all the tools and materials left in the cabin.

 

Christina and Guinivere moved not-yet-installed light fixtures to the crawlspace.


 

Jon pulled the protective OSB off the balcony car-decking floor.


 

Christina cleaned up the subfloors.


 

Christina and Siggy began the work of finding and sinking screws that were standing proud of the subfloor surface.


 

Guinivere and Siggy touched up the paint in places where Jon had splattered finish while working on the collar ties. (Wish I'd masked.)



 Sunday 

Guinivere worked on cleaning the subfloors more, which involved cleaning the vacuum cleaner filter, too.


 
 
Jon and Guinivere cleaned the big windows.
 

Guinivere made dropcloth ballgowns for the chandeliers to protect them from sanding dust. She named them Chanderella.



 
We loaded all the tools and scaffolding back into the freshly-organized storage container.
 
 
 Guinivere, Siggy, and Jon spent much of the day sinking subfloor screws and replacing ones that had failed.



 
Siggy wired up the dryer outlet to supply 240V power for the floor sander.
 

 
Siggy locked up the gate and we went home to rest and prepare for our cross-country trip to see Eliot.




Comments

Post a Comment

Popular posts from this blog

It is DONE!

The final inspection was today. This guy is Levi, the county inspector, and as you can see, we passed! He only had two questions for me. One was about the energy efficiency credits and the blower door test, for which I had the compensating paperwork for the low-flow faucets already prepared. The second was asking for a smoke detector outside the bedroom; I pointed up and he saw that we already had one tucked into the alcove. And that was that! I got up at 5am to be certain I'd be here before the inspector, and I was ... by about five hours. In that time, I took another truckload of tool buckets down to the storage container, then picked up all the floor protection in the great room and vacuumed and mopped. It's glowing! Then I went back down to the storage container to get a hammer so I could glue in 32 wood plugs to cover the screws for the french doors. I fought with installing the screens, but the frames are too big! The manufacturer said "yeah we don't even make th...
Post a Comment
Read more

Odds and ends

I made progress on a bunch of little things today.  I painted a fencepost in 12" segments and pounded it in at the property line, where the outdoor camera can see it. Now we can measure the snow accumulation. I worked on finishing up almost-complete receptacle branch circuits. The first one I worked on was a little mystery: all the receptacles were installed, but the power didn't reach past a certain point in the line. After some investigation with a wire tracer and watching through the videos we took before covering the walls, I worked out what had happened: two receptacles shared a stud bay, facing into opposite rooms. The plan had been to bring power up to one box, jump over to the other box, and continue back down to the crawlspace to the next box. We forgot the jumper. I couldn't fish a wire between the boxes myself, so that repair waits. Upstairs, installing two receptacles completed the branch. The bathroom vent hole in the tile backer board was a skosh too small. ...
Post a Comment
Read more

Energy efficiency testing

I came up after work to meet Brian, the contractor who is doing our blower door test: In this test, a big fan pumps air out of the house at a prescribed pressure differential, and then the air flow rate is measured in cubic feet per minute, then converted to whole house air changes per hour. The maximum limit is 5.0, and we scored that. Hooray! Brian said that we'd done a pretty solid job sealing the house, especially for an owner-built house; getting extremely tight seals requires careful awareness of the sealing challenges at every stage of construction. Another thing I learned by building a house. While I was up there, I got most of the way through installing a heat pump water heater to comply with energy efficiency requirements I re-discovered when looking up the blower door test requirements. This is all a bit silly. For our application -- a house occupied infrequently -- the on-demand heater is the best efficiency tradeoff, because it has zero standby waste. Unfortunately, th...
Post a Comment
Read more